Brazilian surgeon, Bruno Gobbato used Apple Vision Pro to assist in surgery operation
byu/170071 ininterestingasfuck

The Apple Vision is widely considered one of the biggest tech releases of the last few years. This innovative headset provides a pristine, real-time depiction of the surrounding environment while allowing the user to launch apps as floating screens around them. Many have tried it in different places, like on a plane, on the subway, and now in an operating room. Brazilian surgeon Dr. Bruno B. Gobbato recently shared his experience using this device during a surgery, showing its possibilities beyond leisure and entertainment.

Dr. Gobbato is an orthopedist and traumatologist who specializes in shoulder and elbow surgery. The procedure took place at the Jaraguá Hospital, a city located in southern Brazil. There, the specialist performed surgery to fix a shoulder tendons injury using the arthroscopy technique—and his Apple Vision Pro.

This arthroscopy method involves inserting a camera into the joint, allowing the surgeon to operate without the need to completely cut the shoulder open. The camera was then connected to Apple Vision Pro, giving the doctor the possibility to follow a feed of a magnified view of the procedure on a large screen with ultra-high resolution. Next to this screen, he also had a 3D model of a shoulder pop up within his field of vision, as well as patient reports in the Notes app.

Gobbato's main concern was how the Apple Vision Pro camera would process the images in real-time given that there was not enough lighting in the operating room. While Apple claims that the see-through latency of the Vision pro is 12ms, which is extremely low, they've also warned that using the device in low light conditions may increase the risk of collision with objects in the vicinity. The company also advises against using it around sharp objects and any other situations requiring attention to safety. However, Dr. Gobbato, a medical professional, has praised the device, especially for its convenience.

Though this is an incredible occurrence, it is not the first time an Apple Vision Pro has been used in the operating room. In March, a team at Cromwell Hospital in London used the headset to repair a patient's spine. They used it for a similar purpose—superimposing virtual screens and having key information at hand. “It eliminates human error. It eliminates the guesswork,” Suvi Verho, lead scrub nurse at London Independent Hospital, told the Daily Mail. “It gives you confidence in surgery.”

The Vision Pro also allowed Gobbato to record the surgery from his point of view, which you can watch above—please keep in mind that it is video footage of a surgery, so viewer discretion is advised.

Bruno Gobbato: Website | YouTube
h/t: [Reddit]

Related Articles:

Experienced Tech Reviewer Shows What It’s Like to Actually Use the New Apple Vision Pro

Surgeons Use Virtual Reality To Separate 3-Year-Old Conjoined Twins With Fused Brains

Patient Stays Awake and Plays Guitar During Surgery While Doctors Remove a Tumor From His Brain

Inspiring Plastic Surgeon Has Helped Heal Children Suffering From Cleft Palate With 37,000 Free Surgeries

READ: Surgeon Uses Apple Vision Pro as a Visual Assist During Shoulder Surgery in Brazil

 

View this post on Instagram

 

A post shared by @spaceonewatches

Even though we now tell time by checking our phones or perhaps a clock, the scientific passage of time is measured by the orbit of the Earth around the Sun, and the Moon around the Earth. The Tellurium by SpaceOne takes this idea literally, by reimagining the classic analog watch as a three-dimensional model of the Moon's orbit around Earth and Earth's orbit around the Sun. The ingenious design not only gives the time, but also provides the opportunity to observe the current locations of the celestial bodies that are most important to humans, bringing the wearer closer to the vast universe surrounding them.

SpaceOne is a company that specializes in space-themed watches, and the Tellurium is certainly no exception. The out-of-this-world watch was developed by Olivier Gamiette, who is “renowned for his fluid, futuristic lines and deeply audacious dials.” The timepiece comes with a sleek 42 mm titanium case, and has additional astronomical objects made of polished titanium contained within. The Moon, Earth, and Sun replicas are surrounded by a minimalist triangular clock face with the numbers 4, 8, and 12 printed on it. Additionally, the hour and minute clock hands are positioned in the center of the watch, and they glow in the dark, radiating the same light that the Sun produces every day. The Tellurium also features a sophisticated dating system, which ensures that the day display will change as soon as the hour hand hits midnight.

The Earth takes one year to orbit the Sun and the Moon orbits the Earth in 27.3 days. The Tellurium is equipped with a state-of-the-art mechanism called Soprod P024 Movement, which enables the little spheres contained in the watch to move at the same time as their real-life counterparts. The Earth replica is connected to a small piece of sapphire crystal, which is linked to a ring with 365 teeth, one for each day of a standard year. Beside it, there is another gear called the star wheel, which has 31 teeth and moves two smaller wheels to change the date.

The Tellurium is currently available for presale on the SpaceOne website for €2,990 (approximately $3,726). Delivery is predicted to start in October or November 2024.

The Tellurium by SpaceOne is a futuristic watch design, featuring miniature replicas of the Sun, Moon, and Earth to tell the time.

 

View this post on Instagram

 

A post shared by @spaceonewatches

More than just telling time, this remarkable timepiece tracks the exact positions of the Sun, Moon, and Earth in relation to one another.

 

View this post on Instagram

 

A post shared by @spaceonewatches

 

View this post on Instagram

 

A post shared by @spaceonewatches

SpaceOne: Website | Instagram
h/t: [Designboom]

All images via SpaceOne.

Related Articles:

These NASA-Approved Watches Include Genuine Moon Dust

Animated Watches Inspired by Beautiful U.S. National Parks

Five Cutting-Edge Watches

Artist Encases Incredibly Detailed Miniature Worlds Inside Antique Pocket Watches

READ: Out-of-This-World Watch Tells Time Through Replicas of the Sun, Moon, and Earth’s Orbits

Photo: doomu/Depositphotos
This post may contain affiliate links. If you make a purchase, My Modern Met may earn an affiliate commission. Please read our disclosure for more info.

Whether you’re a budding artist or a fervent DIYer, 3D printing is a useful tool for bringing your designs to life. It can be used to create unique home decor, one-of-a-kind art, customized organizational tools, and so much more. For those who want to dive into 3D printing for the first time, it can be overwhelming, especially when looking for the best 3D printers for beginners. Top-tier printers can cost hundreds or even thousands of dollars, not to mention the complicated machinery and new design software learning curve. Starting small, both in terms of price and size, can help you build the foundation to become a 3D printing pro.

To compile this list of the best 3D printers for beginners, I did a ton of research. I scoured the web for top-rated options, read through reviews and customer ratings, and considered significant factors like price, features, user-friendliness, and more. Eventually, I landed on a Creality model as our best overall choice, along with some other great picks from brands like Elegoo and Entina.

Below, check out the best 3D printers for beginners.

Our Top Picks:

1. Best Overall: Creality Ender 3 V2 Neo 3D Printer – $245 at Walmart
2. Best Resin 3D Printer for Beginners: Elegoo Mars 3 – $209.99 at Amazon
3. Best Budget 3D Printer for Beginners: Entina Tina 2 Mini 3D Printer – $178 at Amazon
4. Best 3D Printer for Kids: 3Doodler 3D Pen – $49.99 at Target
5. Best Pen 3D Printer: MYNT3D 3D Pen Pro – $60.71 at Amazon

Reviews of The Best 3D Printers for Beginners

1. Best Overall:  Creality Ender 3 V2 Neo 3D Printer

Amazon | $199

If you’re a beginner,  the Creality Ender 3 V2 Neo 3D Printer is a great pick for its affordability and versatility. (There’s a reason other Creality models are also on My Modern Met’s list of the best 3D printers on Amazon.)

The printer is easy to set up and heats quickly, plus it has a relatively large print volume for its size. It only uses PLA filament, one of the most common and versatile 3D printing materials, and has convenient auto-bed leveling, which means you won’t have to worry about manually calibrating the printer bed every few prints. For a relatively affordable price point, this is a great pick.

$245 at Walmart

The Specs:

• Printing Material: PLA
• Print Volume: 8.7 x 8.7 x 9.8 inches
• Machine Dimensions: 17.2 x 16.7 x 18.6 inches

The Pros:

• Easy to use and assemble
• Good print quality
• Relatively affordable for a high-end printer

The Cons:

• Nozzle may need to be replaced
• Noisy
• Requires frequent releveling

What Others Are Saying

The Creality Ender 3 V2 Neo 3D Printer has a 4.2-star Amazon rating from more than 3,800 reviews. It’s also recommended by U.S. News & World Report 360 Reviews as the best 3D printer for beginners.

Buy the Creality Ender 3 V2 Neo 3D Printer:

$245 at Walmart

$199 at Amazon

2. Best Resin 3D Printer for Beginners: Elegoo Mars 3

Amazon | $209.99

Resin generally creates a more detailed and smooth surface because it’s a liquid that gets cured during the print process rather than a filament that is layered. For resin lovers, the Elegoo Mars 3 is the best resin 3D printer you can buy as a beginner. It boasts a sleek design, and won’t take up much surface area at 22 inches long by 11 inches wide.

The Mars 3 has convenient touchscreen controls and a USB port so you can easily import your designs and start building. It’s also quite sturdy and prints designs under a shield, which may make it a better option for those with kids or pets.

$209.99 at Amazon

The Specs:

• Printing Material: Resin
• Print Volume: 5.6 x 3.5 x 6.8 inches
• Machine Dimensions: 22 x 11 x 12 inches

The Pros:

• Sleek design
• Compact
• Sturdy construction

The Cons:

• Finicky touchscreen
• Confusing instructions make it hard to troubleshoot
• Small print volume

What Others Are Saying

The Elegoo Mars 3 has over 3,300 Amazon reviews and an impressive 4.5-star rating. The printer has also received positive reviews from Tom's Hardware, All3DP, and DIY Machines.

Buy the Elegoo Mars 3:

$209.99 at Amazon

3. Best Budget 3D Printer for Beginners: Entina Tina 2 Mini 3D Printer

Amazon | $178

If you want to try out 3D printing without spending a ton of cash, the Entina Tina 2 Mini 3D Printer is an excellent starter model. With auto bed leveling and a magnetic platform, this printer is not only affordable and easy to set up, but it’s also compact, which means it’s easy to store.

The Tina 2 Mini 3D Printer can print with PLA, PLA Pro, and TPU. As an added bonus, the printer arrives fully assembled, so you won’t have to spend hours diving into the user manual before getting started. Plus, its cool design isn’t too hard on the eyes, either.

$178 at Amazon

The Specs:

• Printing Material: PLA, PLA Pro, or TPU
• Print Volume: 3.9 x 4.7 x 3.9 inches
• Machine Dimensions: 11.4 x 8.3 x 8.3 inches

The Pros:

• Compact and easy to store
• Arrives set up
• Affordable

The Cons:

• Short lifetime
• Best suited for smaller prints

What Others Are Saying

This printer is recommended as the best budget-friendly 3D printer for beginners by U.S. News and World Report 360 Reviews and one of the best kid-friendly 3D printers by 3D Insider.

Buy the Entina Tina 2 Mini 3D Printer:

$178 at Amazon

4. Best 3D Printer for Kids: 3Doodler 3D Pen

Target | $49.99

For those looking to gift a 3D printer to the creative kid in your life, a 3D pen may actually be the better option—especially if it’s the 3Doodler 3D Pen. Not only is this 3D printing tool super affordable, but it’s also really easy to use, making it a great option for kids ages 6 or older under parental supervision.

The pen works like a hot glue gun—you just feed the filament through and start “drawing.” But unlike a hot glue gun, the pen (even the nozzle) won’t get hot while in use, making it super safe for young children. It’s also chargeable, so kids can use it completely cord-free.

$49.99 at Target

The Specs:

• Printing Material: PLA or ABS
• Print Volume: Unlimited
• Machine Dimensions: 9 x 6 x 2.6 inches

The Pros:

• Kid-friendly
• Inexpensive
• Safe
• Easy to use

The Cons:

• Short battery life
• Only compatible with certain refill filaments

What Others Are Saying

The 3D pen has over 7,000 Amazon reviews and 4.3 stars. It’s also recommended by U.S. News and World Report 360 Reviews and All3DP.

Buy the 3Doodler 3D Pen:

$49.99 at Target

$49.99 at Amazon

5. Best Pen 3D Printer: MYNT3D 3D Pen Pro

Amazon | $60.71

3D pens, like the MYNT3D 3D Pen Pro, are great for kids, adults, and beginners alike. This affordable  3D pen is a low-stakes way to get hands-on with 3D printing without having to purchase an expensive full-sized machine. Once you upgrade, the MYNT3D 3D Pen Pro is great to have on hand to fill in any gaps or add features to your 3D projects.

Like the 3Doodler 3D Pen, this MYNT3D pen is cordless and user-friendly while still offering a solid amount of control. You can adjust the temperature and speed, and there’s even a small OLED display that shows the temperature. The grip of the pen itself is also very comfortable, which is important if you’re going to be attempting larger, longer projects.

$60.71 at Amazon

The Specs:

• Printing Material: PLA or ABS
• Print Volume: Unlimited
• Machine Dimensions: 8 x 5.2 x 2.6 inches

The Pros:

• Easy to use
• Comfortable grip
• Precise temperature controls
• Comes in three colors of plastic filament

The Cons:

• Included plastic filament can go quickly
• Short cord

What Others Are Saying

The MYNT3D 3D Pen Pro has earned more than  12,000 Amazon reviews and boasts a 4.4-star rating. It’s also recommended as one of the best 3D printing pens by All3DP.

Buy the MYNT3D 3D Pen Pro:

$60.71 at Amazon

Other 3D Printers to Consider

Photo: cookelma/Depositphotos

Anycubic Photon Mono 2

This sleek resin printer has more than 1,960 Amazon reviews and is recommended by Tom's Hardware, CNET, and All3DP. While it’s in the same price range as our favorite 3D printer, reviewers found that it’s not as intuitive to set up or use. The Anycubic Photon Mono 2 is available at Amazon for $159.99.

SCRIB3D P1 3D Printing Pen

The most enticing feature of this 3D pen is its affordable price. The model is recommended as one of the best 3D pens by Popular Science, but unlike the 3Doodler 3D Pen, this pick has a bit of a learning curve, making it neither kid- or beginner-friendly. The SCRIB3D P1 3D Printing Pen is available at Walmart for $29.99.

AnkerMake M5 3D Printer

AnkerMake’s M5 3D Printer is super fast, operating at a speed of 250 mm per second, earning it a spot on CNN Underscored’s guide to 3D printing for beginners. It’s also compatible with PLA, PETG, TPU, and ABS filaments. However, despite its speed, the printer is hard to use and noisy, especially given its nearly $700 price tag.  The AnkerMake M5 3D Printer is available at Best Buy for $699.99.

Anycubic Kobra 2 3D Printer

The Anycubic Kobra 2 3D Printer is a very fast and reliable 3D printer that’s compatible with a large variety of printing materials, including PLA, ABS, TPU, and PETG. It has also been positively reviewed by PCMag and Techradar. While the printer may be easy to assemble initially, buyers found that it can be difficult to troubleshoot problems, particularly when it comes to leveling. The Kobra 2 3D Printer is available at Walmart for $209.

Why You Can Trust Us

Photo: Reflexpixel/Depositphotos

Hi! I’m Grace, a graphic designer, freelance writer, and product tester for everything from appliances to the latest tech gadgets. My work has appeared in Gear Patrol, Apartment Therapy, and many other publications. I aim to help consumers find the best products to spend their money on.

For this guide to the best 3D printers for beginners, I researched a ton of models by reading through trusted publications and customer ratings and reviews. From there, I considered important qualities like price and easy setup to ensure each option is well-suited for beginners.

What to Know About 3D Printers for Beginners

Photo: Marina1408/Depositphotos

Things to Consider When Choosing a 3D Printer for a Beginner

From new vocabulary terms to confusing user manuals, finding a quality 3D printer can be quite a hassle for a novice. The main factors to consider when narrowing your search include bed leveling, float switches, printing material, and more.

Bed Leveling

Since 3D printing is done layer by layer, the first layer that goes directly on the heat bed must be level. 3D printers can have automatic and manual bed leveling where either you or the printer controls the levelness of the heat bed. While automatic leveling may be more beginner-friendly, it’s often associated with a higher cost.

Print Volume

Most 3D printers geared towards beginners will be on the smaller side because they’re lower in price and easier to use. However, if you have a specific design or item in mind that you’ll be using your printer for, make sure to check the volume that a printer can produce before buying. Keep in mind that 3D pens won’t have any size constraints since you’ll be designing freehand, but the bigger the design, the more unwieldy your project will likely be.

Printing Material

3D printers can come equipped to handle a variety or just one type of print material, such as resin, polylactic acid (PLA), acrylonitrile butadiene styrene (ABS), or thermoplastic polyurethane (TPU):

• Resin: Resin 3D printing can use three different types of materials: stereolithography (SLA), liquid crystal display (LCD), or digital light processing (DLP). In general, this printing material is best for pieces with fine details and smooth finishes.
• PLA: This recyclable material is usually made from cornstarch or sugar cane. It performs best in lower temperatures but is great for stronger, more dimensional pieces.
• ABS: ABS is one of the most popular forms of 3D printing. It’s great for creating plastic solid parts and a variation of temperatures.
• TPU: This flexible and elastic material is good for creations that may require impact-absorption and a soft-touch surface.

Many printers come with a small amount of printing material to get you started. Make sure that the 3D printer you’re choosing will be able to print with your desired material.

3D Pen vs. 3D Printer

While full-size 3D printers tend to be the default when people talk about 3D printing, 3D pens are a great way to fill in existing 3D printed designs, free-hand your own designs, or get kids involved in 3D printing. Consider what type of projects you want to create prior to deciding on whether you want a 3D printer or a 3D pen.

Photo: Marina1408/Depositphotos

How Do 3D Printers Work?

Like a 2D printer, 3D printers will process a design given to them and print that design layer by layer, starting at the bottom and building its way to the top. The printer heats the material put into it so that it can become malleable and shape your design. Each 3D printer has a maximum build size that your design cannot exceed as well as a specific Z resolution, or layer height, that dictates how thin features of your design can be.

How to Use 3D Printers for Beginners

The 3D printing process starts with your design, which you can create yourself using beginner-friendly 3D design software like Tinkercard. You’ll then export your design as an STL file and import it into a slicing software, which will convert it into a Gcode that your printer can read.

From there, you can start setting up your printer with the material you’ll be using and dictate the size and placement of your design. Once all of this is done, you’ll be ready to print!

Photo: miata_dad

How Much Do 3D Printers Cost?

3D printers are sold at a wide range of prices, from hundreds to thousands of dollars. For at-home enthusiasts, high-quality printer models will usually be around $500 to $1,000. However, beginners can get away with machines that cost $300 or less, with the caveat that they may eventually have to upgrade to another more costly printer.

What are 3D Printers Used For?

3D printers can be used in a variety of fields and settings, but for the home hobbyist, these machines are generally used to create items like small figurines or other small-to-moderate-sized pieces of decor for their home.

Related Articles:

You Can Now Download and 3D Print 18,000 Famous Sculptures and Artifacts

You Can Now Download and 3D Print 18,000 Famous Sculptures and Artifacts

Tokyo Restaurant Offers 3D-Printed Sushi Tailored to Your Health Needs

Affordable 3D Printer Effortlessly Crafts Beautiful Ceramics in Minimal Time

Prices were accurate at the time of publication.

READ: The 5 Best 3D Printers for Beginners in 2024

 

View this post on Instagram

 

A post shared by Portals.org (@portals_org)

When you hear the word “portal,” images of fantasy or science-fiction books probably come to mind. And while portals may not be naturally occurring in our world, technology has provided us with the opportunity to create things that used to only exist in the pages of storybooks.

Portal is one of these creations. Aptly named, it is a new public installation that will be located at the Flatiron South Public Plaza at Broadway, Fifth Avenue and 23rd Street this spring. It will broadcast live video from Dublin, Ireland, into New York City. At the same time, another portal will be set up in Dublin that will live stream footage from New York City, connecting the viewers at both locations.

Benediktas Gylys, a Lithuanian artist and entrepreneur, is the mastermind behind the portals. He is passionate about creating projects that connect humanity and advertise our similarities at a time when we are increasingly divided. According to Portal‘s website, “Portals are an invitation to meet fellow humans above borders and prejudices and to experience our home—planet Earth—as it really is: united and one.”

This set of portals is far from the first one that the organization has worked on. Currently, they have a pair located in Vilnius, Lithuania, and Lublin, Poland, that were set up in 2021 as an homage to Gylys' home country. Their website also houses a form where you can write about why your city should have a portal installed in it.

For more on the Portal project, check out its website and Instagram.

A real-life portal will be built in New York City and Dublin in the spring, and will live stream video between both locations.

 

View this post on Instagram

 

A post shared by Portals.org (@portals_org)

The first pair of portals were installed in Vilnius, Lithuania, and Lublin, Poland, in 2021.

 

View this post on Instagram

 

A post shared by Portals.org (@portals_org)

Portal: Website | Instagram | YouTube
Benediktas Gylys: Website | Instagram | Facebook
h/t: [TimeOut]

Related Articles:

Mesmerizing “Portals” Made from Multi-Layered Colors Mimic Our Beautifully Mystifying World

NASA’s Mars Curiosity Rover Photographs a Mysterious “Alien Portal”

Optical Illusion Graffiti Creates Portal to a Parallel Universe on the Side of a Building

READ: Giant Portal Near Flatiron Building Connects People From New York City and Dublin

While many of us have only become familiar with AI over the past year or so, artist Refik Anadol has been using the technology for years to create immersive installations. Now, his studio is releasing its most ambitious project yet: the Large Nature Model, the world's first open-source generative AI model dedicated to nature.

Under development for DATALAND, Refik Anadol Studio's future museum and Web3 platform dedicated to data visualization and AI art, The Large Nature Model is trained on billions of open-source nature images. Interestingly, the model isn't just for visuals; it can also produce sound and scent elements.

“Blending art, technology, and nature, our model aims to raise awareness about environmental issues and inspire innovative solutions by finding connections among isolated archives,” shares Anadol. “By engaging people on multiple sensory levels, the outputs of the model make the abstract concept of environmental conservation tangible, encouraging a collective responsibility to act.”

“Coral Dreams” at the Serpentine Gallery.

Anadol presented the model at the NVIDIA GTC AI Conference, where he transformed a 65-foot by 131-foot wall into a live AI data sculpture. Fed with 2.5 million ethically sourced nature images, the wall exploded with visuals that show the model's endless creative possibilities.

The conference is not the only place where the Large Nature Model is on display. At London's Serpentine Gallery, Anadol's Echoes of the Earth: Living Archive shows his years-long experimentation with data on coral reefs and rainforests. On view until April 7, visitors are in for a multi-sensory experience that will deepen their love of nature.

“The dream is to help gallery visitors grasp the unseen yet incredible role of data in our worlds,” shared Anadol in an interview with long-time mentor, art critic Hans Ulrich Obrist. “I believe people will feel enveloped by the data, the richness of information, and the overwhelming beauty found within nature.

“This project is not about mimicking or replacing nature, it's about appreciating, loving, and respecting nature. We’re not replacing nature, we’re preserving it.”

Refik Anadol Studio has announced the Large Nature Model, the world's first open-source generative AI model dedicated to nature.

Using ethically sourced data, the model can generate nature-related imagery, sounds, and scents.

 

View this post on Instagram

 

A post shared by Refik Anadol (@refikanadol)

At the NVIDIA GTC AI Conference, Anadol used the model to transform an enormous wall into a live AI data sculpture.

 

View this post on Instagram

 

A post shared by Refik Anadol (@refikanadol)

The model is also incorporated into work at Anadol's exhibition at the Serpentine Gallery.

“This project is not about mimicking or replacing nature, it's about appreciating, loving, and respecting nature. We’re not replacing nature, we’re preserving it.”

 

View this post on Instagram

 

A post shared by Refik Anadol (@refikanadol)

Refik Anadol: Website | Instagram | Facebook | Vimeo

My Modern Met granted permission to feature photos by Refik Anadol.

Related Articles:

Refik Anadol and BVLGARI Reveal Immersive Installation Created With AI

Media Artist Refik Anadol on His AI-Driven Artwork Redefining Space [Podcast]

Undulating Art Installation Made Up of Publicly Sourced Images Takes Over the Las Vegas Sphere

Dynamic Art Installation Uses AI To Turn 200 Million Nature Images Into a Mesmerizing 3D Visual Experience

READ: Refik Anadol Announces World’s First AI Model Dedicated to Nature

According to the World Health Organization, there are 236,000 annual drowning deaths worldwide. That's why every second counts when rescuing someone from a body of water. While donut-shaped lifesavers are key to bringing people to safety, Noras Performance, a Portugal-based company has brought this invaluable object to the 21st century, likely saving countless lives. U SAFE is a remote-controlled, U-shaped lifesaving device that can reach a person in distress in no time.

The company describes their lifebuoy as a “self-propelled, remotely controllable system designed to be a fast and accurate ‘aquatic robot.'” To facilitate the rescue, it allows people to use it intuitively, allowing anyone in the vicinity to grab the remote and launch the lifesaver—working even in challenging conditions such as bad weather or strong currents.

The U SAFE can even be tossed from above, as it resists drops up to 98 feet. It can later reach a speed of up to 9.3 miles per hour and operate for 40 minutes—meaning it'll have enough power to tow the victim back to the ship or the shore. The only requirement is that it needs the cooperation of a conscious victim for a successful rescue.

The lifebuoy can work on whatever side it lands on, activating itself instantly when deployed. To keep the person being rescued safe, its design prevents it from being flipped by the waves thanks to its double turbine engine. Being able to control it from afar makes it a priceless resource for rescues in tough-to-reach spots and cold weather. This could also prevent additional tragedies that may occur when a victim latches onto a human rescuer and may push them down in a moment of panic.

This clever invention has won many accolades, like being named Honoree in the Human Security for All category at the CES 2023 Innovation Awards. But above all, it has been tested and praised by those who have to face and perform this kind of rescue as part of their jobs, from lifeguards and ship captains to members of the U.S. Coast Guard and the Navy. Redningsselskapet, an organization dedicated to assist people on the Norwegian coastline even used it to tow a small boat—a testament to the power of this device and the many ways it can save lives.

To learn more about the U SAFE, visit their website.

U SAFE is a remote-controlled, U-shaped lifesaving device that can reach a person in distress in no time.

It was designed by Noras Performance, a Portugal-based company, and has earned praise from people who perform rescues, like lifeguards, ship captains, and members of the U.S. Coast Guard and the Navy.

The company describes their lifebuoy as a “self-propelled, remotely controllable system designed to be a fast and accurate ‘aquatic robot.'”

To facilitate the rescue, it allows people to use it intuitively, allowing anyone in the vicinity to grab the remote and launch the lifesaver, working even in challenging conditions such as bad weather or strong currents.

Watch the U SAFE in action:

U SAFE: Website | Instagram | YouTube

Related Articles:

Teen Invents Gadget To Help Dementia Patients Like His Grandmother

Self-Balancing Robotic Wheelchair Helps Give Visibility to Those With Disabilities

Wearable Airbags Deploy in Milliseconds To Protect the Elderly From Falls

15-Year-Old Amputee Receives First Bionic Arm and Can’t Hide Her Joy

READ: Remote-Controlled Lifesaver Designed To Rescue People in Challenging Conditions

 

View this post on Instagram

 

A post shared by Hemesh Chadalavada (@hemeshch)

In 2018, when Hemesh Chadalavada was 12 years old, his grandmother forgot to turn off the gas after she made herself a cup of tea. This experience caused Hemesh to spend hours on YouTube learning about robotics in order to figure out if he could create a device that would detect these accidents in case he wasn't there. The research ultimately led the teenager to invent the ALpha Monitor, a badge-like device designed for dementia patients that sends out an alert if the person wearing it falls or wanders off.

Hemesh developed the device with information from a care center run by the Alzheimer’s and Related Disorders Society of India. In 2022, he beat 18,000 other entries and won a $120,000 grant in a Samsung-sponsored science fair. This resulted in the Prime Minister of India, Narendra Modi, posting on X (formerly Twitter) that he “really admired” Hemesh.

Even though Hemesh's grandmother, Jayasree, passed away in 2023 from Alzheimer's, the young inventor's ALpha Monitor has the potential to improve the lives of the more than 55 million people living with dementia today. The teenager will finish the exam season in March and then will devote all of his time to getting the ALpha Monitor on the market by September. After the device is for sale, Hemesh plans to go abroad to study robotics.

Those interested in keeping up with the ALpha Monitor's production and Hemesh's career can visit his website and follow him on Instagram.

A teenager named Hemesh Chadalavada has invented a badge-like device for dementia patients that will send out an alert if the patient falls or wanders off.

 

View this post on Instagram

 

A post shared by Hemesh Chadalavada (@hemeshch)

Here he is in 2020, introducing the ALpha Monitor.

His innovative prototype made him a top 10 finalist of the competitive Samsung's Solve for Tomorrow Challenge

 

View this post on Instagram

 

A post shared by Hemesh Chadalavada (@hemeshch)

In fact, Hemesh beat out 18,000 applicants and won the whole competition.

 

View this post on Instagram

 

A post shared by Hemesh Chadalavada (@hemeshch)

Hemesh Chadalavada: Website | Instagram | YouTube
h/t: [Good News Network]

Related Articles:

19-Year-Old Designs App to Help His Family Care for His Grandmother With Dementia

Dad With Dementia Tells His Daughter What She Means to Him Even Though He Doesn’t Fully Remember Her

This Pop-Up “Restaurant of Mistaken Orders” Only Staffs Waiters with Dementia

Horse Keeps Running Away to Visit Dementia Patients Who Feed Him Carrots

READ: Teen Invents Gadget To Help Dementia Patients Like His Grandmother

AI seems to be advancing at a rapid pace. Not too long ago, image generators were inspiring some creators and concerning others. Now, the natural next step has come upon us. OpenAI announced Sora, a new text-to-video AI model that can turn short text prompts into photorealistic videos that are up to a minute long—a feat charged with weighty implications for artists and users alike.

“We’re teaching AI to understand and simulate the physical world in motion, with the goal of training models that help people solve problems that require real-world interaction,” writes OpenAI. The company claims that the clips can maintain visual quality and adhere to the user’s prompt.

To add realism and depth to each video, Sora can create detailed backgrounds and a myriad of characters. The tech company adds, “The model understands not only what the user has asked for in the prompt, but also how those things exist in the physical world.”

OpenAI describes Sora as a “diffusion model,” which generates a video by starting off with one that looks like static noise and gradually transforms it by removing the noise over many steps. “Sora is capable of generating entire videos all at once or extending generated videos to make them longer,” they say. “By giving the model foresight of many frames at a time, we’ve solved a challenging problem of making sure a subject stays the same even when it goes out of view temporarily.”

Still, the company acknowledges Sora is not perfect. “It may struggle with accurately simulating the physics of a complex scene, and may not understand specific instances of cause and effect. For example, a person might take a bite out of a cookie, but afterward, the cookie may not have a bite mark,” OpenAI explains. The model can also mix up the spatial details of a prompt, and like most other AI tools, it seems to struggle to get hands and other human features just right.

Despite its weaknesses, OpenAI reiterates the milestone Sora represents: “The model has a deep understanding of language, enabling it to accurately interpret prompts and generate compelling characters that express vibrant emotions. Sora can also create multiple shots within a single generated video that accurately persist characters and visual style.”

To demonstrate how Sora works, OpenAI shared some clips created with different prompts. Some are detailed down to the framing, setting, clothing, and what goes through the main character's mind to something as simple as “a corgi vlogging itself in tropical Maui.” When asked, Sora also delivered videos in the cartoonish 3D style that has come to characterize publicly accessible CGI animations.

Since a tool this thorough can be easily misused, OpenAI has stated that it will be taking several important safety steps. To ensure its best use, they'll be working with experts in areas like misinformation, hateful content, and bias who will adversarially test the model. The company will also be building tools to help detect misleading content and reject text input prompts that are in violation of their usage policies.

“We’ll be engaging policymakers, educators and artists around the world to understand their concerns and to identify positive use cases for this new technology,” they conclude. “Despite extensive research and testing, we cannot predict all of the beneficial ways people will use our technology, nor all the ways people will abuse it. That’s why we believe that learning from real-world use is a critical component of creating and releasing increasingly safe AI systems over time.”

Open AI has unveiled an AI model called Sora, which can create video from text prompts.

The results seem unbelievably realistic.

Humans, animals, and landscapes are all realistically rendered in motion.

OpenAI: Website
h/t: [PetaPixel]

Related Articles:

AI “Completes” Keith Haring’s Intentionally Unfinished Last Artwork, Sparks Controversy

New Tool Defends Artists by “Poisoning” AI Image Generators

AI Generator Will Turn Any Person Into a Renaissance Style “Masterpiece”

Getty Images Releases Commercially Safe AI Image Generator Based on Its Own Media Library

READ: OpenAI’s Sora Can Turn Short Text Prompts Into Photorealistic Video

 

View this post on Instagram

 

A post shared by Adobe (@adobe)

As technology has evolved, fashion has evolved with it, often combining the two disciplines in new and inventive ways. Recently, Adobe made history by partnering with fashion designer Christian Cowan to design an interactive dress that can instantly change designs.

The dress was first unveiled at Adobe MAX in October 2023 as Project Primrose and quickly gained international attention for its clever engineering. The secret to the pattern changes lies in “laser-cut polymer dispersed liquid crystal ‘petals' that can electronically change patterns multiple times per second,” according to Adobe's website. These petal-like segments were placed carefully on the dress to hide the flexible circuit board beneath, which shines and makes the flowery panels appear to change the design. These transitions are so fast that it can be difficult to notice unless you pay close attention to the dress. This is quite literally a “blink and you'll miss it” feat of engineering.

Technological elements aside, the dress is gorgeous all on its own. It has a short, off-the-shoulder design and is covered in metallic petals, which gradually turn into large star cutouts as you turn your gaze downward to the bottom of the outfit. Finishing off the design is the sheer fabric around the bust, matching the gloves the model is wearing in the complete look.

To learn more about the process behind creating the dress, scroll down to watch an insightful video featuring Cowan behind the scenes. You can also read more about it on Adobe.

A model recently walked the runway at New York Fashion Week wearing a pattern-changing dress by fashion designer Christian Cowan in collaboration with Adobe.

 

View this post on Instagram

 

A post shared by Adobe (@adobe)

The dress, which is part of an initiative called Project Primrose, can change designs in the blink of an eye.

 

View this post on Instagram

 

A post shared by Adobe (@adobe)

These quick transformations are thanks to the hundreds of laser-cut polymer “petals” covering the dress and changing patterns multiple times per second.

 

View this post on Instagram

 

A post shared by Adobe (@adobe)

Watch to learn more about designer Christian Cowan's process:

 

View this post on Instagram

 

A post shared by Adobe (@adobe)

Christian Cowan: Website | Instagram
Adobe: Website | Instagram
h/t: [DesignTAXI]

Related Articles:

2023 World of WearableArt Competition Celebrates Fashion, Theater, and Craftsmanship

Bella Hadid Has White Dress Spray-Painted Onto Her Body During Coperni Fashion Show

RIP André Leon Talley: Remembering an Icon Who Championed Diversity in Fashion

Japanese Designer Fashions a Cyberpunk Kimono With a Neon Backpack

READ: Dazzling Adobe Dress Looks Like It’s Shape-Shifting at New York Fashion Week Runway

Brian Eno ‘Turntable II' 2024 © Brian Eno courtesy Paul Stolper Gallery photography Luke Walker 2024

Musician Brian Eno has long shaped the history of his craft. Not only is he a pioneer of ambient music, but he has also produced landmark music albums for acts such as U2, David Bowie, and Coldplay. Beyond his work in music, Eno is also a prolific visual artist. Marrying both of his passions, Eno designed a light-up turntable that is nothing short of a work of art.

Turntable II is a revival of the first record player designed by Eno, which was distributed in 2021. “When it doesn’t have to do anything in particular, like play a record, it is a sculpture,” the musician states. Made up of a round platter and base with sequenced acrylic LED lights, the turntable changes colors randomly and slowly. “It’s the softness of these colors and the way they merge with each other that is so seductive,” Eno adds.

Much like his ambient music enhances the atmosphere with experimental beats, Eno's Turntable II delicately shapes the ambience by glowing in vibrant shades of pink, blue, orange, yellow and green—which Eno calls “colorscapes.” Beyond its aesthetic appeal, this functional sculpture can play both 33 and 45 rpm vinyl. The turntable features a white 8.6″ Pro-Ject aluminium tonearm and an Ortofon white 2M cartridge.

“Since my first experiments with light and sound in the late 1960's, I’ve never ceased to be fascinated by the amazingly intricate, complex and unpredictable results produced by simple deterministic systems,” Eno shared back in 2018. “Out of simplicity, complexity arises. That is for me the most incredible idea of evolution theory and of cybernetics. John Cage once said: ‘The function of Art is to imitate Nature in her manner of operation,' and that has been an objective for me throughout my working life.”

Brian Eno's Turntable II is limited to 150 pieces, and its price begins at £20,000 (a little over $25,000). As an additional treat to his fans, the record player comes with the musician's signature and edition number engraved on the side. And much like a sculpture, those interested can see it in person at the Paul Stolper Gallery in London until March 9, 2024.

Beyond his work in music, Brian Eno is also a prolific visual artist. Marrying both of his passions, Eno designed a light-up turntable that is nothing short of a work of art.

Brian Eno ‘Turntable II' 2024 © Brian Eno courtesy Paul Stolper Gallery photography Luke Walker 2024

Turntable II is a revival of the first record player designed by Eno, which was distributed in 2021.

Brian Eno ‘Turntable II' 2024 © Brian Eno courtesy Paul Stolper Gallery photography Luke Walker 2024

“When it doesn’t have to do anything in particular, like play a record, it is a sculpture.”

Brian Eno ‘Turntable II' 2024 © Brian Eno courtesy Paul Stolper Gallery photography Luke Walker 2024

Made up of a round platter and base with sequenced acrylic LED lights, the turntable changes colors randomly and slowly.

Brian Eno ‘Turntable II' 2024 © Brian Eno courtesy Paul Stolper Gallery photography Luke Walker 2024

“It’s the softness of these colors and the way they merge with each other that is so seductive.”

Brian Eno ‘Turntable II' 2024 © Brian Eno courtesy Paul Stolper Gallery photography Luke Walker 2024

Brian Eno: Website
Paul Stolper Gallery: Website

My Modern Met granted permission to use photos by Paul Stolper Gallery.

Related Articles:

This DIY Vinyl Engraver Lets You Create and Play Your Own Records at Home

Over 100,000 Vinyl Records Are Being Digitized for Anyone to Listen to Online

Vinyl Surpasses CD Sales for the First Time Since 1987

‘Queen’ Guitarist Brian May Is Knighted by King Charles III at Buckingham Palace

READ: Glowing Turntable Designed by Brian Eno Lights up in Different Colors as It Plays